If you are thinking about insulating your attic, then you are most certainly wondering about the different options available. You know that insulation can help the environment and it can also lower you energy bill by 20% but what type of Minneapolis insulation is right for your home? We’ve done the research for you. Below are some of the basic types of insulation and why blown insulation is most likely the best choice for your St. Paul insulation needs.

Roll or Batt Insulation in Minnesota

One of the most common types of DIY insulation for your attic is batt insulation. Batt insulation is flexible products usually made from fiberglass or rock wool. They are used in wall studs, attic or floor joists and will be installed one by one. Although it can be considered to rate very highly in terms of the R-value, batt insulation is actually quite tricky to install and requires plenty of patience, dedication and perfection in the business of DIY. Furthermore, you will need to spend a long weekend completing the task and you will have to prepare your body for some serious bending. If you choose to use roll or batt insulation, make sure you have set enough time to complete the project, have consulted a building code inspector to ensure you are using the right R-value and have the appropriate safety gear including a disposable respirator, gloves and protective glasses.

The Rigid Foam Insulation Option

Another option when it comes to your insulation in Twin Cities need is rigid foam insulation. This tends to be the most expensive type of insulation but offers very high R-values. In fact, foam insulation will offer about 2 times greater R-value than the other types of insulation which can be effective in buildings with space limitations or in extremely cold climates.

Loose Fill Insulation, or Blown Insulation in St Paul

Another option is loose fill or blown-in insulation. This type of insulation is blown in with a machine to fit into the tough spaces. There is no bending required but you will need the proper blown insulation system. Loose fill insulation will blanket your attic or other tight space with insulation, usually made from fiberglass. This type of insulation is actually a lot cheaper than you would think. For those who do not want the muss and fuss of a DIY project, then blown insulation is your best bet. A contractor will be able to complete the Minnesota insulation project is under five hours so you can come home to a properly insulated house without worrying about getting your hands dirty or wasting your weekend cramped in the attic.

If you are looking for blown insulation in Twin Cities, give us a call at 952-767-1151 in the West Metro area or 651-481-1466 in the East Metro area. We can provide you with a more comprehensive understanding of the insulation process as well as a free quote for your Minneapolis insulation needs.